Industrial Ethernet RTU Data Acquisition Module For PLC DCS SCADA System

Industrial Ethernet RTU Data Acquisition Module For PLC DCS SCADA System

model list

Ethernet is optional for all models

System parameters

• 32-bit ATMEL ARM(72MHZ) multipoint control unit
• GCOS(10ms scheduling mechanism) operation system
• 7-35VDC @2W Wide power in, with reverse protection, isolation
• Installation by DIN rail mounting or screw fixing
• Working Environment -40℃～85℃,5%～95%RH(non-condensing)
• Protection IP20
• Watchdog 1.5m guard

Series port parameters

• With 1RS485 and 1RS232
• 2500V lightning protection,overvoltage, overcurrent, ESD protection
• Communication parameter,default 9600.N.8.1
• MODBUS RTU Protocol

Analog input

• Input type 4～20mA<default>,option: 0～20mA/0～5/1～5/0～10V
• Precision 0.1%,16 bit
• sample rate 0.01m

Digital input

• Voltage level input(ON signal level 5-30VDC,6mA@24VDC)
• OFF by 0-3VDC input
• Isolation: opto-couple(2500V lightning protection, overvoltage, overcurrent protection)
• 0.01m Refresh

Digital output

• Relay output, NO
• Isolation: optocoupler isolation& relay isolation
• Relay contact load 5A/250VAC, 5A/30VDC
• Reaction time: 0.01s

PT100 Input

• Input type PT100
• Temperature precision 0.1℃
• Measure range -200～320℃

remote transmission unit

gsm remote terminal unit

Industrial Ethernet RTU Data Acquisition Module For PLC DCS SCADA System Images